China Rn120 Tractor Front Drive Axle (1204) with Good quality

Solution Description

Item Information:
>>Implementing ltalian Fiat wheel tractor sophisticated technology
>>Using middle-organized sort transmission shaft and swing sort center swing pin
>>Internal composition:center reducer,differential and ultimate planet reducergood rigidity with entire front axle scenario
>>Roller bearing making use of among the ending and the pin for gentle and effective steering
>>Independent oil road,hydraulic pressure steering,steering angle to 50°Single cylinder or double cylinder
>>Adopting machining middle and specific machine for machining,planetary reduction equipment for gear  grinding,all the sealing elements are imported ones,not broken assembly
>>Adaptive for 110HP earlier mentioned four-wheel driving tractor 

Complex Parameter:

Performance parameter RN120 Front driving axle
Driving ratio sixteen.a hundred twenty five/21.125
Outline dimension 2081×630×400
Driving shaft entrance axle  Middle-arranged driving shaft
 Input shaft parameter m=2.75  z=10  α=30°(m=2  z=14  α=30°)
Connection bolt between hub and spoke 8×M16×1.5
Distance between spokes (mm) 1924
The pressure of the hydraulic oil 10±0.five
load bearing (kN) 29.four
Net weight (KG) with no oil 313
Oil Volume Center (L) 9
Spherical edge (L) one.2
Front
Axle
Place
Extroversion angle of entrance wheel
Introversion angle 7°30´
Retroverted angle 10°
Fore tie (mm) one~five
Steering strategy fluid-hyperlink steering
Swing angle of the front axle 11°
 Maximum steering angle of front wheel 50°
Steering
Cylinder
Steering hydraulic cylinder variety  Right rearThe remaining and right rear kind
Diameter of steering hydraulic cylinder(mm) 45
Steering hydraulic cylinder quantity 2
Steering hydraulic cylinder travel(mm) 205

US $1,609.34-1,741.86
/ Piece
|
2 Pieces

(Min. Order)

###

Type: Axle
Certification: ISO9001
Driving System Parts: Front Axle
Transmission System Parts: Drive Axle
Color: Black
Model: 1204

###

Customization:

###

Performance parameter RN120 Front driving axle
Driving ratio 16.125/21.125
Outline dimension 2081×630×400
Driving shaft front axle  Middle-arranged driving shaft
 Input shaft parameter m=2.75  z=10  α=30°(m=2  z=14  α=30°)
Connection bolt between hub and spoke 8×M16×1.5
Distance between spokes (mm) 1924
The pressure of the hydraulic oil 10±0.5
load bearing (kN) 29.4
Net weight (KG) without oil 313
Oil Volume Middle (L) 9
Round edge (L) 1.2
Front
Axle
Position
Extroversion angle of front wheel 1°
Introversion angle 7°30´
Retroverted angle 10°
Fore tie (mm) 1~5
Steering method fluid-link steering
Swing angle of the front axle 11°
 Maximum steering angle of front wheel 50°
Steering
Cylinder
Steering hydraulic cylinder type  Right rear\The left and right rear type
Diameter of steering hydraulic cylinder(mm) 45
Steering hydraulic cylinder quantity 2
Steering hydraulic cylinder travel(mm) 205
US $1,609.34-1,741.86
/ Piece
|
2 Pieces

(Min. Order)

###

Type: Axle
Certification: ISO9001
Driving System Parts: Front Axle
Transmission System Parts: Drive Axle
Color: Black
Model: 1204

###

Customization:

###

Performance parameter RN120 Front driving axle
Driving ratio 16.125/21.125
Outline dimension 2081×630×400
Driving shaft front axle  Middle-arranged driving shaft
 Input shaft parameter m=2.75  z=10  α=30°(m=2  z=14  α=30°)
Connection bolt between hub and spoke 8×M16×1.5
Distance between spokes (mm) 1924
The pressure of the hydraulic oil 10±0.5
load bearing (kN) 29.4
Net weight (KG) without oil 313
Oil Volume Middle (L) 9
Round edge (L) 1.2
Front
Axle
Position
Extroversion angle of front wheel 1°
Introversion angle 7°30´
Retroverted angle 10°
Fore tie (mm) 1~5
Steering method fluid-link steering
Swing angle of the front axle 11°
 Maximum steering angle of front wheel 50°
Steering
Cylinder
Steering hydraulic cylinder type  Right rear\The left and right rear type
Diameter of steering hydraulic cylinder(mm) 45
Steering hydraulic cylinder quantity 2
Steering hydraulic cylinder travel(mm) 205

How to Identify an Axle

An axle is the central shaft that rotates a wheel or a gear. The axle may be fixed to a vehicle or to its wheels, and may include bearings for movement. The axle may also be connected to other parts of the vehicle, such as the suspension and steering systems. The axle may also include mounting points for bearings.
Axles

Identifying an axle

Identifying an axle is easy if you know what to look for. Identifying the axle is an important part of axle rebuilding. The first step in the process is to determine the make and model of the axle. This can be done by looking for the Bill of Materials number on the right or left tube.
When trying to identify an axle, it helps to know its dimensions, hub pattern, and number of bolts. The width of the axle can also help you determine its type. Wide axles are commonly used on light-duty pickup trucks, while narrow axles are typically found on sports cars. Once you’ve identified the type of axle, you can look for its bolt pattern. The diameter of the axle is another way to identify it.
Axle identification tags can also help you find an axle in a salvage yard. They are usually stamped with information that can help you determine the make, model, and gear ratio of a particular axle. It’s important to note that the tag’s information may change from one year to the next.
If you don’t know where to look for an axle tag, it’s probably a GM vehicle. GM vehicles are equipped with RPO codes, 3-character codes that designate various features of a vehicle. The stickers are usually located near the spare tire or in the glove box compartment. Simply scan the RPO code using your smartphone to obtain this information.
When changing an axle in a truck, it is imperative to identify the rear end first. Differential configurations and shapes can vary greatly, so you must be able to find the right one. Luckily, the process of identifying an axle is simple, and there are several ways to do it. The most common methods for identifying an axle are the axle tag number and the shape of the differential cover.
Axles

Inspection

Axle inspection is an important part of the manufacturing process and must be carried out many times during its working life. There are many ways of inspecting an axle, including visual inspection and ultrasonic testing. Axles come in hollow and solid styles. Their dimensions vary depending on the type of rail that they are attached to. London Underground trains use a type of axle known as a VLU axle.
Inspection of axle flanges should be done at least once a year. The inspection process can vary depending on the type of axle and the type of repair required. Using a magnetic particle inspection can detect cracks in the axle flanges. Another method is HFEC, which detects cracks in the attach bolt holes.
The air springs should also be checked for chafing or damage. The front and rear spring hangers should be free of cracks or excessive movement. The front bushing should also be checked for deterioration and wear. Fasteners should also be checked for looseness and torque. If the fasteners are loose or damaged, replace them immediately.
Axles

Repair

It is important to get regular inspections of your car’s axle to avoid costly repairs. Fortunately, most axle repairs are relatively straightforward. All it takes is a few simple tools and a safe way to prop up your car. However, if you don’t feel confident performing a repair on your own, consider hiring a mechanic for the job.
Axles are one of the most commonly damaged parts of a car, and repairing one can help you keep the car in good shape for years to come. In fact, it can even improve the performance of your tires. If your car is experiencing serious problems, you should seek professional assistance to ensure a safe repair.
If you suspect an axle problem, it’s important to get it checked as soon as possible. Bad axles can cause a bumpy ride, affect tire rotation, cause grease to leak from the wheels, and even lead to a wreck. Ultimately, you’ll want to avoid driving your car if you suspect a problem with its axle.
Your car’s axle may make a clicking noise as it moves. It could also cause vibrations that affect your passengers or even the steering wheel. The axle is an important part of the car because it supports the weight of the car and keeps the wheels in place. If the problem affects your car’s handling, it might be time for an axle replacement.
You can tell if an axle is damaged by excessive vibrations or unusual noises. This can be caused by a number of problems, including overloading the vehicle, bad potholes, or even bad carrier bearings. When you hear this noise, you should seek professional help immediately to ensure the safety of your vehicle and your passengers. A bad axle can cause other car problems as well, such as a faulty ball joint or suspension problems.
China Rn120 Tractor Front Drive Axle (1204)     with Good quality China Rn120 Tractor Front Drive Axle (1204)     with Good quality
editor by czh 2022-12-25