China 3 4 axles low bed boy deck flatbed container gooseneck Excavator transport semi trailer trucks 100Ton lowbed truck trailer axle alignment cost

Use: Truck Trailer
Type: Semi-Trailer
Material: Steel
Size: 17500*3000*1250mm
Max Payload: 60T
Product name: 3 4 axles low bed boy deck flatbed container gooseneck
Function: Transport heavy equipment
Color: Customers Optional
Axle: 16 Ton, CZPT brand
Tire: 315/80R22.5
Rim: 9.0*22.5
Capacity: 60 Tons
Tractor: Kinds
Main Beam: T700/Q345 Steel
Suspension System: Mechanical Supension
Certification: ce
OE NO.: HJGMCK21049
Packaging Details: CIMC HUAJUN China Vehicle Factory 3 Axles Hydraulic Gooseneck Transport Low bed 80 ton lowbed Semi Trailer Truck For Sale1. Naked or waxed.2. One unit was shipped separately.3. Via RO-RO or Bulk.
Port: ZheJiang /HangZhou/ZheJiang

3 4 axles low bed boy deck flatbed container gooseneck Excavator transport semi trailer trucks 100Ton lowbed truck trailer

ItemSpecification
Size17500*3000*1250mm.
Body SheetFloor thickness: 4mm, checkered plate; Body material: high tensile steel.
ChassisHeavy duty and extra durability designed I beam; Opting for high tensile steel, welded by automatic Submerged-Arc processes.
Axle16T CZPT brand axle
Tire315/80R22.5
Rim9.0-22.5
Suspension3 axles CIMC HUAJUN reinforced type
Lead springCIMC HUAJUN reinforced type, 12 pieces and 16mm thickness.
Braking system2 line air braking system with air tank, CZPT emergency relay valve, braking chambers and mechanical slack adjusters.
Electrical system24V, LED lights. 7 pin electrical connector. Parking, stop, reverse, number plate and indicator lights conform to European standard, rear front and side reflectors.
Shot blastingChassis is comletely shotblasted to SA 2.5 grade,and painted with first layer of international Zinc Epoxy primer(30 Microns DEF),second layer international high built polyurethane under coat(40 microns DFT),THIRD AND FORTH LAYERS INTERNATIONAL alkyd FINISH TOP coat.total 80-100 microns. high quality painting. the whole trailer waxed.
Landing gear28T, 2 side operation.
ChamberDouble type
King pin(2′) 50# or (3.5′) 90#
Ramp/
Spare tire carrierCIMC HUAJUN standard
Tool boxCIMC HUAJUN standard
ColorAccording to customers’ requirements and RAL color code.
Packing&Shipping 3 4 axles low bed boy deck flatbed container gooseneck Excavator transport semi trailer trucks 100Ton lowbed truck trailer Waxed Packing by RO-RO or Vessel1. One unit was shipped separately;2. Two or units were packed as 1 set ;Shipping by Containers1. One or 2 units were packed in a container;2. Shipping by containers via CKD or SKD; Our Customers Our factory was established in 1952, with more than 60 years’ experience in trailer manufacturing industry, we make “CIMC HUAJUN” as the leading brand over the world through years’ unremitting efforts. By now, our trailers were shipped to more than 60 countries and area. Such as: The Philippines, Vietnam, Laos, Myanmar, Thailand, Malaysia, Cambodia, Brunei, Singapore, Indonesia, Australia, Mongolia, Algeria, Ethiopia, Djibouti, Kenya, Tanzania, Rwanda, Mauritania, Mali, Guinea, Ghana, Chad, Nigeria, Gabon, Dr Congo, South Africa, Sudan, Mauritius, Uzbekistan, Kazakhstan, Bangladesh, Saudi Arabia, Egypt, Public of Costa Rica, Ukraine, etc.More than 90% of our customers cooperated with our factory more than 15 years. Our Supplier Through the cooperation with famous brand suppliers, not only to ensure the quality of products, but also to sure the timeliness and reliability of after-sales service. Our service So far, we have visited more than 60 countries and regions to investigate the market demand and road conditions, and set up offices in many countries to make after-sales service more timely and easily.In addition, we have built KD plant in Djibouti in 2018, which mainly serves the assembly of trailers for customers in Africa areas and provides technical and operational guidance. Oversea Sales Team Oversea Engineer Team Certifications Our Honor:–China Well-Known Trademark –Green Plants–Intelligent Manufacturing Plant–New High-tech Enterprise–China Intellectual Property Advantage Enterprise…Our Certifications:–CE–CCC–ISO–TUV–SGS… Factory History HangZhou CIMC HUAJUN VEHICLE CO., LTD., a joint venture company, located in HangZhou, ZheJiang , with convenient transportation, is a wholly-owned subsidiary of CIMC, 1 of the most important factories in CIMC VEHICLE GROUP. CIMC VEHICLE GROUP, as 1 of the 9 CIMC major business sectors, comes to the world leadership position.CIMC HUAJUN covers an area of 1.8 million square meters, total assets of USD 1.3 billion, about 2000 employees. Main products are semi-trailer, dump truck, tank trailer, box trailer, refrigerator truck or trailer, special purpose vehicle, etc. annual producing capacity of more than 65,000.00 units.

The Different Types of Axles

An axle is the central shaft of a gear or wheel. Axles are either fixed to the wheels or fixed to the vehicle. In some cases, they rotate together with the wheels and vehicle. The axle may also include bearings and mounting points. There are many types of axles, and it is important to understand the difference between each type.

Transaxle

The transaxle is the single mechanical device that combines the functions of a car’s differential, axle and transmission. It’s produced in manual and automatic models. A manual version is the preferred one for everyday driving, while an automatic one is more efficient in preventing vehicle damage. Here are some basics about the transaxle.
Transaxles are essential components of a car’s drivetrain, and any problems can cause major damage and leave the driver stranded. Transaxles include the transmission and the differential, which transfer the engine’s power to the wheels. Taking the time to check the transaxle is important to ensure that everything is functioning properly.
The transaxle is a very complex machine that combines the functions of the final drive and the transmission into one compact unit. The transaxle is a very versatile piece of automotive technology, and is an essential component of a front-wheel-drive car. In addition to conventional front-wheel-drive vehicles, many modern rear-wheel-drive vehicles use a transaxle to provide more even weight distribution.
The first American car to use a transaxle was the Cord 810 in the early 1920s. It was well ahead of its time, but was unsuccessful. For many years, the front-wheel drive automobile was absent from the United States automotive scene. It wasn’t until the 1960s that a front-wheel drive automobile re-emerged. A front-wheel-drive automobile, known as a transaxle, was the first to reach the market, and it’s not the only car to use this gearing.
A transaxle is a good option for vehicles with an extreme amount of torque. This system can handle powerful engine designs while keeping weight in the engine bay. It is not a perfect solution for all vehicles, however. In some vehicles, the extra weight added to the engine bay will affect the performance. The added weight will reduce traction. In addition, a transaxle mounts behind the engine, which adds weight to the rear.
Transaxles are the primary part of vehicles that have front-wheel drive. Their purpose is to transmit power from the engine to the drive wheels. The front-wheel-drive assembly had 2 short axles with complicated ball joints.
Axles

Full-floating axle

A full-floating axle is different from a semi-floating axle in several ways. A semi-floating axle is used for rear wheel drive cars, where it has a bearing mounted in the axle shaft. This axle supports the vehicle’s weight and transmits the drive torque from the transmission to the wheels. However, a semi-floating axle’s load capacity is limited by the size of the axle bearing. A full-floating axle, on the other hand, has the bearing mounted on the outside of the axle tube. The bearing is the only part of the axle that supports the vehicle, and the hub and bearing assembly are held together by a large nut.
The drive axle on a full-floating axle is splined at both ends so that it can easily be removed from the rear of a vehicle without removing the wheel. This type of axle makes it possible to change gears quickly and easily. Because of this, it’s not necessary to remove the wheels and tires in order to replace the axle. Instead, a common tool used to remove the axle from the wheel hub is an axle wrench.
Full-floating axles are more common in heavy-duty vehicles. The ability to carry heavy loads without causing the axle to break is a big advantage to full-floating axles. These axles require less maintenance and require less bends than traditional axles and may even be worth the extra investment if you have a heavy load to carry.
A full-floating axle allows the driver to change a broken axle shaft without having to remove the entire wheel. A full-floating axle will also allow the driver to remove the axle shaft without having to take off the wheel. Full-floating axles are also more durable than semi-floaters, which have weight resting on the axle tubes and housing.
While a full-floating axle is more expensive to manufacture, it is better for heavier vehicles that carry heavy loads. It is better to choose a full-floating axle if you have a heavy load or plan on towing.
Axles

Three-quarter floater

A three-quarter floating axle is a type of floating axle that’s a compromise between the full and semi-floating types. Its bearings are located on the axle casing rather than on the hub, which means that it’s less susceptible to axle breakdown. However, it’s not as robust as a full floating axle.
This design combines the benefits of fully-floating axles with the simplicity of a semi-floating axle. Instead of having multiple wheel bearings, a single wheel bearing is installed in the center of the hub. The hub is then keyed rigidly to the axle shaft, providing a connecting connection and maintaining wheel alignment.
While a full-floating axle is the most common style of truck axle, you may see the three-quarter floater on the side of a pickup. It was common for 3/4-ton Gms to use these axles until the 1980s. Dodge and Ford also used a semi-float axle called a Dana 60. The difference between the two types of axles is the amount of support provided by the axleshaft and hub, and the number of lug nuts on the axleshaft and hub are different.
The three-quarter floater axle drive assembly of the present invention is illustrated in FIG. 1. The axle housing comprises an elongated axle tube 12, a hub member 30, and a hub shaft 16. A hub member 30 is rotatably supported on the axle tube 12 by an anti-friction bearing assembly 42. The axle shaft is retained in place by a domed plate 26.
This axle design has two main advantages. First, it transfers the weight of the vehicle to the axle casing. It also helps transfer the driving torque and side thrust to the wheel. This type of axle also has a differential cross shaft, which limits inward axial movement of the axle shaft.
Axles

Dead axle

A Dead axle is a structural component that supports the rear wheel of a vehicle. It can either be straight or angled and is located behind the drive axle. Depending on the vehicle, the dead axle may be steerable. Tag axles are also common on agricultural equipment and certain heavy construction machinery. They are also known as lazy axles because they only contact the ground when a vehicle is carrying a significant load, thus saving tire wear. Dead axles may be rigid or flexible.
Some rear dead axles can also be configured as an air tank. The air is taken in and out of the rear dead axle through the port portions of the rear axle. This can reduce the size of the air tank. For this reason, it is a preferred design for rear dead axles. While most vehicles are equipped with two axles, the rear axle can be used to accommodate cargo.
FIG. 1 is a schematic plan view of a vehicle with two rear axles. The front axle is called the drive axle and the rear dead axle is called the dead axle. These components are located on a truck body frame. There are also battery and fuel tanks. They are used to distribute driving force from the front to rear wheels.
An axle is a crucial component of a vehicle. It transfers power from the engine to the wheels. A live axle is connected to the drive shaft and transmission, while a dead axle receives no direct power. This is the main difference between a live and dead axle. Although a dead axle is not as useful as a live one, it is still essential to understand what drives a car.
Dead axles are used in many vehicles for different purposes. Many large trucks are fitted with several of them for load bearing purposes. They also help distribute weight.
China 3 4 axles low bed boy deck flatbed container gooseneck Excavator transport semi trailer trucks 100Ton lowbed truck trailer     axle alignment costChina 3 4 axles low bed boy deck flatbed container gooseneck Excavator transport semi trailer trucks 100Ton lowbed truck trailer     axle alignment cost
editor by czh